Fence Company in Knoxville, TN: Installation, Repair & Gates
Knoxville Fence Company serves homeowners across Knoxville and the surrounding area, including Maryville, Alcoa, Oak Ridge, and Farragut, with the full range of fence work: new installation in wood, vinyl, chain link, and aluminum or ornamental iron; repair of existing fences; gate installation and repair; and storm damage assessment and rebuilding. We are a local crew, not a national franchise. The same team that walks your fence line is the same team that builds it, and we know the conditions that challenge fences in this region.
When homeowners search for a fence company near me in Knoxville, they are usually facing one of three situations: a fence that has started to lean or move, a gate that drags or has come off its hinges, or storm damage that has brought down a section or more. We handle all of them, and we start by diagnosing what actually failed and whether it is worth repairing or time to replace. Call (865) 564-6298 for a free estimate, or read more about our fence repair work.
Why Fences Lean in Knoxville: Clay Soil and Rotted Posts
The most common reason a fence leans in this area is a post problem, not a panel problem. The clay soil expands when it holds moisture and shrinks as it dries, working a post back and forth season after season until the post racks out of plumb. At the same time, humidity keeps the wood damp right at ground line, where the post carries the most load. Wood that stays wet at the base will decay over time, weakening the post from the inside. A fence that was plumb five years ago may be visibly leaning today because the posts have failed, even though the pickets and rails are still sound.
We assess a leaning fence by walking the entire line, not just the section that caught a homeowner's eye. We test every post, not one. We check whether the concrete footing itself has heaved or shifted, or whether the post has rotted or cracked inside a sound footing. That distinction matters, because it determines whether the repair is a post replacement or a full rebuild. When we find a handful of failed posts in an otherwise sound fence, we propose resetting or replacing those posts and keeping the rest. That saves money and holds for years. When posts have decayed along the whole run, we tell you plainly: repairing it section by section will cost more over five years than replacing the fence once. We quote both options and let you decide. On wood that has rotted, we replace it. Moisture at the ground line is the cause. We do not perform termite or pest inspections, apply chemical treatments, or carry out pest control, which is a separate regulated trade. If you have questions about what we find, call (865) 564-6298 or request a free estimate to walk the line together.
The repair-or-replace decision is honest guidance, and it is what sets a local fence company apart. A fence is an investment, and the right choice depends on what is actually broken and how long you plan to stay. We repair posts and reset footings when the rest of the fence justifies it, and we build new when that is the better spend.
Storm Damage Fence Repair in Knoxville
Severe wind and storms can push over entire runs of fence on the same line, snap posts at grade, or tear away panels. When that happens, the fence needs to be rebuilt. The good news is that a fence rebuilt after storm damage can come back stronger than it was before, with posts set deeper or with better concrete footing than the original installation. We provide a free damage assessment, photograph each section, and prepare a written estimate that you may choose to share with your insurance carrier. We help document what happened and what it will cost to put it right.
Coverage decisions rest with your carrier, and approval of any claim is between you and your insurer. We do not act as an adjuster, and we do not make promises about what will or will not be covered. What we do is give you clear photographs and a detailed estimate so you have the information you need when you file. If you have storm damage, call (865) 564-6298 or request a free estimate. We can also help you with storm damage fence repair once you have a plan in place.
Cedar, Pine, Vinyl or Chain Link: Choosing for This Climate
Choosing a fence material is a trade-off between upfront cost, maintenance, and how long you want it to last. Cedar looks beautiful and weathers to a soft gray, but under this sun and humidity it needs cleaning and re-staining every two to three years to hold its color and protect the wood. That maintenance cycle is what decides whether a cedar fence lasts closer to ten years or closer to twenty. Pressure-treated pine is the budget option and holds up well when maintained; it is pressure-treated to resist rot at ground line, and it will last longer than cedar if you do not stain it. Vinyl and PVC fencing require almost no maintenance and will not rot or splinter, but they are not the right choice for every application and they do cost more upfront. Chain link is the toughest option per dollar spent, especially in galvanized or black powder-coated steel, and gauge and mesh size determine how long it will hold. Aluminum and ornamental iron are the choice for pools, front yards, and places where you want a refined look or need to rack the fence to follow grade. We can walk through the real trade-offs and help you choose the right material for your budget and your plans.
Wood and privacy fences, vinyl fencing, chain link, and aluminum and ornamental iron are all priced by the linear foot, and that cost depends on what we find on site: slope, access, whether there is an old fence to tear out, and how many gates you need. We measure and quote on site so you get an accurate number for your actual fence line.
Permits, HOA Rules, Property Lines & Pool Barriers
Fence height, setback, and material rules are set by the city or county, and they vary across Greater Knoxville. In most jurisdictions a permit is required before installation begins, though requirements differ. Many cities in the area require utility locates before any digging, and Tennessee 811 utility locates are required by law before we set posts. We request those locates before we dig, and we recommend you tell us about any private lines on your property, such as irrigation or landscape lighting, because 811 locates cover participating utility operators only and do not mark private systems. If you live in a master-planned community or subdivision with a homeowners association, deed restrictions or HOA architectural standards commonly govern fence height, material, and color, and approval is usually needed before work starts. It is worth checking your HOA rules and any deed restrictions before you design your fence. On property lines, we are fence contractors, not land surveyors. We install on the line you identify, working from your existing survey or plat. Determining where a property line actually lies is the work of a licensed land surveyor. We recommend confirming the line and getting any neighbor or association consent in writing before we start, so there are no surprises later.
Pool barriers are installed to meet the pool barrier codes that apply at your address, with self-closing self-latching hardware that meets code requirements. We do not certify compliance, and final determination of whether a barrier meets code rests with the local building official. No barrier replaces supervision. Requirements vary by jurisdiction, and some pool barrier codes are strict. Always verify the specific requirements with the Knoxville building department and your HOA before starting your project, and let us know what the code calls for when you contact us for pool fence installation.
Ready to get started? Knoxville Fence Company serves in Knoxville and surrounding areas. Book your free on-site estimate today.
Get Your Free Estimate